Producción Científica Profesorado

Characterization and wear performance of boride phases over tool steel substrates



Ortiz Domínguez, Martín

2016

Vera Cárdenas, E. E., Lewis, R., Martínez Pérez, I. A.,Bernal Ponce, J. L., Pérez Pinal, F. J., Ortiz Domínguez, M., Rivera Arreola, E. D. (2016), Characterization and wear performance of boride phases over tool steel substrates. Advances in Mechanical Engineering 8(2), 1?10.


Abstract


This research work was conducted to characterize boride phases, obtained from the powder-pack process, on AISI H13 and D2 steel substrates, and investigate their tribological behavior. The boriding was developed at a temperature of 1273K with an exposure time of 8 h. X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were conducted on the borided material to characterize the presence of the FeB, Fe2B, and CrB phases and the distribution of heavy elements on the surface of the substrates. The adherence of the boride layers was evaluated, in a qualitative form, through the Daimler-Benz Rockwell-C indentation technique. Sliding wear tests were then performed using a reciprocating wear test machine. All tests were conducted in dry conditions at room temperature. A frequency of 10 Hz and 15-mm sliding distance were used. The applied Hertzian pressure was 2.01 GPa. Scanning electron microscopy was used to observe and analyze the wear mechanisms. Additionally, the variation of the friction coefficient versus the number of cycles was obtained. Experimental results showed that the characteristic wear mechanism for the borided surface was plastic deformation and mild abrasive wear; for unborided substrates, cracking and spalling were observed.



Producto de Investigación




Artículos relacionados