Characterization and boriding kinetics of AISI T1 steel
Ortiz Domínguez, Martín
2019
Ortiz-Domínguez, M., Keddam, M., Elias-Espinosa, M., Ramírez-Cadona, M., Arenas-Flores, A., Zuno-Silva, J., Cervantes-Sodi, F. and Cardoso-Legorreta, E., (2019). Characterization and boriding kinetics of AISI T1 steel, Metallurgical Research & Technology, 116(102); 1-11.
Abstract
The AISI T1 steel was hardened by the solid boriding process in the temperature range 1123?1273K for a time duration of 2 to 8 h. A kinetic model, based on the integral method, was applied to the growth of a single boride layer (Fe2B) at the surface of AISI T1 steel. This diffusion model has been validated experimentally by considering two additional boriding conditions. A numerical solution was then obtained after solving the set of differential algebraic equations in order to compare the experimental thicknesses of Fe2B layers with the predicted values. The activation energy for boron diffusion in AISI T1 steel was estimated as 212.76 kJ mol_1 and a comparison was made with other values available in the literature. The formed boride layers with a saw-tooth morphology were examined by scanning electron microscopy (SEM). X-ray diffraction confirmed that the borided layer was composed of only Fe2B. The Daimler-Benz Rockwell-C indentation technique was employed to assess the cohesion of Fe2B layers on AISI T1 steel. In addition, the pin-on-disc and wear scratch tests were carried out for investigating the wear behaviour of borided AISI T1 steel.
